My work in Overglaze to date has concentrated on the use of Lustres. I first encountered lustres during my Research on Ornamentation and Decoration 16 years ago for my Graduate diploma in Visual Arts. I was influenced heavily by my fascination for the work of Austrian artist, Gustav Klimt. In 2003 I presented a paper at the National Ceramics Conference in Bendigo, Vic, Australia called “Overglaze: Challenging the Myths”. In that I spoke about my work as;
My aesthetic embraces the work of Gustav Klimt, concepts of atmospheric perspective inherent in Chinese landscape ink painting, sensuality, cultural dichotomy, and the elevation of objects from everyday to ceremonial. I have taken my vessels into the realm of ceremony and ritual by using more precious materials and higher levels of skill. I now make pots with volume that are richly patchworked with colours and lustres. As a sensualist I believe that the object itself is pre-eminent, not its implication. The reinterpretation of classical forms, whilst building up my own vocabulary of imagery and relationship of pattern to form, allows me to realise this. I aim for the overall effect of surface patterning combined with the integration of form to create a dialogue through visual stimulation. This has necessitated the use of decorating techniques, which have allowed a very fine degree of control.
I started working with overglaze in 1992-3. I first used lustre when I was completing a graduate diploma in Visual Arts with Owen Rye at Gippsland. I became intrigued with the possibilities of this medium and continued my research with an MFA at QUT, Brisbane and then continued to develop my own style. In 2001 I undertook a 10 week Churchill Fellowship research project on health and safety issues involved with Overglaze as well as the problems encountered in intensive hand decorating techniques. This has allowed me to further extend my work with lustres as well as working with enamels and investigating the making of decals. At this point in time, I have started to investigate how sandblasting together with the use of a computer controlled plotter/cutter can help to further achieve my aims.
On re-evaluating this statement I realize that my intent is still the same and that my efforts in understanding the Health and Safety involved in Overglaze have intensified. To this end I was invited to write an article on Health and Safety and Overglaze. This was published in the Journal of Australian Ceramics, November 2006. This will now be filed under Health and Safety and Library.
Health and Safety and Overglaze (in particular lustres)
Health and safety in ceramics is always an emotive issue and I am well aware that it is up to the individual to become acquainted with the potential hazards and the risks associated with the materials and work methods employed. Ultimately we all have to take responsibility for our own actions. For the purposes of this article I will concentrate on the Overglaze techniques which use lustres, precious metal preparations, enamels (commonly referred to as China paints) and decals. These techniques all require inorganic powders to be dispersed in a liquid and then fixed onto the glazed surface. Organic additives are widely used in the ceramics industry to adapt products to special needs.
The organic additives for ceramic and glass decoration are called oils or media and can be based on different solvents: water, water soluble glycols and glycol ethers, paraffines, esters, aromatic solvents or terpenes from natural sources. Usually mixtures of solvents with different polarity and drying speed are used. Types of organic additives are listed below.
- Softeners (Phthalates, Dioles, Glycolic ethers and ether acetates)
- Liquifiers (Lecithines, Salts of polycarboxylic acids)
- Suspending agents (cellulose ethers)
- Fixatives (Cellulose ethers, Acrylic resins)
- Defoamers (Silicones)
- Preservatives (Amides, Isothiazolones)
Lustres are precious metal based organic compounds dissolved in a solvent base and combined with resins. Gold and platinum consist of precious metal containing organic compounds combined with other organo-metallic fluxes and resins. The main solvent classifications are listed as:
- Aromatic hydrocarbons
- Hydrocarbons with low content of aromates
- Hydrotreated aromatic hydrocarbons (tetraline)
- Alcoholes and ketones (propanoles, butanoles, butanones and diacetone alcohol)
- Terpenes (turpentine oil and etheric oils)
Lustres can contain all or some of the following in varying proportions as the varying lustre colours all have different formulas.
- Methyl cyclohexanol
- White spirit
- Tetrahydrofurfuryl alcohol
The hazard presented by a substance is its potential to cause harm. The risk from a substance to cause harm depends on the hazard presented by the substance, how it is used, how exposure is controlled, how much of the substance you are exposed to and for how long and how vulnerable you are. Finding out precisely which of the solvents have been utilized is not easily done, as there is a degree of secrecy within the industry. So it is best to assume the worst case scenario. This has to take into account the health risks associated with a high concentration of noxious fumes, their flammable nature as well as being irritants to eyes, skin and respiratory tract.
The noxious fumes are present during both application and firing. To overcome the inhalation of fumes, ventilation is the key. The dictionary defines ventilation as the operation and equipment involved in supplying confined spaces with the necessary quantity of fresh air. Toxic substances are unstable, poisonous compounds produced by micro-organisms and these toxins can enter the body through skin absorption, ingestion and inhalation. Though some of the materials that produce these toxins are essential to the creation of ceramics, it is not necessary to stop working with them to remain healthy. However it does mean that a raised awareness and new work habits are essential. Put simply ventilation means that air is sucked out of the workplace and is replaced with fresh air. How do you know then if your ventilation is adequate? If you are slightly short of breath or have a headache at the end of the work session, the ventilation is definitely inadequate.
The options available can be discussed under the following headings
- Substitute materials/work practices
- Dilution ventilation
- Local ventilation
- Personal ventilation
Unfortunately lustres contain solvents and there is no safe way around this apart from switching to reduced lustres. Dilution ventilation means having windows open and a fan drawing the fumes away from the workplace. This is satisfactory if only small amounts of lustre are being used. Local ventilation means a booth constructed over the workplace drawing the fumes away. Personal ventilation is the use of a respirator while working.
My method of protection from fumes is as follows. I use a fume booth constructed by my husband together with a respirator while I have developed a method of working that limits my exposure to the hazards involved. I use a resist method whereby I estimate that 90% of my time is spent using lustre resist which is quite inert. The other 10% is the actual application of the lustre, as all the fine lines apart from some gold pen work is achieved by resist. I am confident that I am limiting my exposure to lustre.
As well as this I wear a respirator. It is a Norton brand 7700 series silicone half face mask model with 2 N7500-1 organic vapour cartridges. It is extremely comfortable to wear despite the fact that I wear glasses. These cartridges are not suitable for clay dust etc. For that you need a particulate filter. However it is not enough to just wear the respirator. It must be maintained. When you have finished using it the inside must be wiped and then the whole lot stored in a sealed (clip lock) bag). This extends the life of the cartridges and keeps dust out. The cartridges need to be replaced when fumes can be smelled through the respirator. Norton has recently been taken over by North Safety Products. A web link to view is http://www.westernsafety.com/newnorthrespirators/newnorth1.html
The fume booth is constructed of acrylic sheeting with aluminium tube corners. It is the size of my worktable and a mistral MWA200P wall exhaust fan removes the air at 167litres per second.
I am extremely careful about getting lustre onto my skin. If this happens I remove it immediately with methylated spirits. So skin absorption is a non event. Ingestion is out of the question as I follow the following safe work practices: do not bite fingernails, put brushes in your mouth, eat, drink or smoke while working. Neither food nor drink comes into my decorating workplace. Noxious fumes are present as well in the firing of lustres as the media in the lustres burns out. Up to 450.C I do not go into the kiln shed without a respirator. This can be very damaging to the lungs. Under no circumstances should kilns be placed inside a dwelling. For enamels I have overcome any health risks by simply making a water-based medium for my use.
This article is not meant to discourage the use of overglaze. Rather it is written in the spirit of raising awareness. Knowledge is a powerful tool and by taking responsibility for ourselves and our actions we empower ourselves. By becoming responsible we can work within a potentially hazardous environment in a very safe manner and enjoy our ceramic pursuits.
- Safe and best work practices employed in industry, for the hand painted decoration of porcelain and ceramics Johanna De Maine, Churchill Fellowship Report http://johanna.demaine.org
- Ceramic Decorating materials: Aspects of Product Stewardship, 1998: ANFFECC, CERAMICOLOR, EPSOM, VdMi.
- Solutions for common Health and safety Issues in the Ceramic Studio. Jeff Zamek. http://www.craftsreport.com/jnauary01/studioissues.html
- Hazards in Ceramicshttp://www.goshen.edu/art/DeptPgs/Hazards.html
- Health, safety and Environment Induction booklet. Royal Doulton Health, Safety and Environment Department, September 1998, Minton House, Stoke-on-Trent, ST4 7QD, UK
- Maintaining a Healthy safe Studiohttp://www.danielsmith.com/leaflet-safe-studio.html